-
MIK-LDG Stainless steel body electromagnetic flowmeter
Magnetic flowmeters operate under the principle of Faraday’s Law of Electromagnetic Induction to measure liquid velocity. Following Faraday’s Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application. Features
- Accuracy:±0.5%，±2mm/s(flowrate<1m/s)
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN10…600
- Ingress protection:IP65
-
MIK-LDG Carbon steel body electromagnetic flow meter
SUP-LDG electromagnetic flow meter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. Features
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Reliability:0.15%
- Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
- Turndown ratio: 1:100
- Power supply:100-240VAC，50/60Hz; 22-26VDC
-
MIK-LDGR Electromagnetic BTU meter
Sinomeasure electromagnetic BTU meters accurately measure the thermal energy consumed by chilled water in British thermal units (BTU), which is a basic indicator for measuring thermal energy in commercial and residential buildings. BTU meters are usually used in commercial and industrial as well as office buildings for chilled water systems, HVAC, heating systems, etc. Features
- Accuracy:±2.5%
- Electric conductivity:>50μS/cm
- Flange:DN15…1000
- Ingress protection:IP65/ IP68
-
MIK-LUGB Vortex flowmeter wafer installation
SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features
- Pipe diameter: DN10-DN500
- Accuracy: 1.0%, 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 13018908613 (WeChat) Email: vip@sinomeasure.com
-
MIK-1158-J Ultrasonic Water flow meter
An ultrasonic water flow meter is a type of flow meter that measures the velocity of a liquid by using ultrasonic waves. The meter has two transducers that are placed at an angle across the flow path of the liquid. The transducers send and receive ultrasonic pulses, and the time difference between the pulses is used to calculate the velocity of the liquid. The velocity is then multiplied by the cross-sectional area of the pipe to determine the flow rate of the liquid.
-
MIK-LUGB Vortex Type Flow Meter
A vortex flow meter is a type of flow meter used to measure the flow of liquids, gases, and steam in pipelines. It is based on the principle of measuring the frequency of vortices generated when a fluid flows around a bluff body. As the fluid passes the bluff body, it creates vortices that are shed alternately from either side of the body. These vortices are detected by a sensor and the frequency of the vortices is proportional to the flow velocity. Vortex flow meters are known for their high accuracy, low maintenance, and reliable performance. They are commonly used in industries such as chemical, petrochemical, food and beverage, and water treatment.
-
MIK-LWGY Liquid Turbine Flow Meter
A liquid turbine flow meter is a type of flow meter that is commonly used to measure the flow rate of liquids in a pipeline. It works by using a turbine rotor that is placed in the flow stream, which rotates as the liquid flows past it. The rotation of the rotor is detected by a sensor and converted into a signal that is proportional to the flow rate.
One of the key advantages of liquid turbine flow meters is their ability to provide highly accurate flow measurements, even for low flow rates. They are also highly responsive and can provide real-time data, making them ideal for use in applications where precise flow control is essential.
-
MIK-LDG Magnetic Type Flow Meter
Magnetic type flow meter, also known as electromagnetic flow meter, is a device used to measure the flow rate of liquids in a pipeline. It operates on the principle of Faraday’s law of electromagnetic induction, where a conductive fluid passing through a magnetic field generates a voltage proportional to its velocity. This voltage is then measured by the flow meter and converted into a flow rate reading. Magnetic type flow meters are highly accurate, have no moving parts, and can measure a wide range of fluid types, including corrosive and abrasive fluids. They are commonly used in industries such as water treatment, chemical processing, and food and beverage production.
-
Magnetic flow transmitter
Electromagnetic flow transmitter adopts LCD indicator and “simple setting” parameters to improve the convenience of maintenance. The flow sensor diameter, lining material, electrode material, flow coefficient can be revised, and the intelligent diagnosis function significantly improves the applicability of the flow transmitter.And Sinomeasure electromagnetic flow transmitter supports customized appearance color and surface stickers. Features Graphic display:128 * 64Output:Current (4-20 mA), pulse frequency, mode switch valueSerial communication: RS485
