MIK-RD702 Guided wave radar level meter

Short Description:

MIK-RD702 Guided wave radar for level measurement in liquids and bulk solids. In level measurement with guided wave radar, microwave pulses are conducted along a cable or rod probe and reflected by the product surface. PTFE antenna, suitable for corrosive medium measurement.


  • Range: 0~20 m
  • Accuracy: ±10mm
  • Application: Acid, alkali, other corrosive media
  • Frequency Range: 500MHz ~ 1.8GHz

Product Detail

Product Tags

  • Specification
 Product  Guided wave radar level meter
 Model SUP-RD702
 Measure range 0-20 meters
 Application Acid, alkali, other corrosive media
 Process Connection Flange
 Medium Temperature -40℃~130℃
 Process Pressure    -0.1 ~ 0.3MPa
 Accuracy ±10mm 
 Protection Grade IP67 
 Frequency Range 500MHz-1.8GHz
 Signal Output 4-20mA (Two-wire/Four)
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction

SUP-RD702 guide wave radar level meter can launch high frequency micro-waves which transmits along with probe.

  • Product Size


  • Installation guide

H—-Measuring range

L—-Empty tank height

B—-Blind area

E—-Minimum distance from probe to tank wall >50mm


The top Blind area refers to the minimum distance between the highest material surface of the material and the measurement reference point.

Blind area at the bottom refers to a distance that cannot be accurately measured near the bottom of the cable.

The effective measurement distance is between the top Blind area and the bottom Blind area.

  • Previous:
  • Next:

  • Write your message here and send it to us