-
MIK-WRNK Thermocouples sensors with mineral insulated
MIK-WRNK thermocouples sensors is mineral insulated construction which results in thermocouples wires that are surrounded by a compacted mineral insulation (MgO) and contained in a sheath such as stainless steel or heat resisting steel. On the basis of this mineral insulated construction, a wide variety of otherwise difficult applications are possible. Features Sensor: B,E,J,K,N,R,S,TTemp.: -200℃ to +1850℃Output: 4-20mA / Thermocouple (TC)Supply:DC12-40V
-
MIK-WZPK RTD Temperature sensors with mineral insulated resistance thermometers
MIK-WZPK RTD sensors is a mineral insulated resistance thermometers.Generally, electrical resistance of metal varies, depending on the temperature. Platinum in particular is more linear and has a larger temperature coefficient than most other metals. It is therefore, most suitable for temperature measurements. Platinum has excellent properties chemically and physically. Industrial high purity elements are readily obtained for long term use as a resistance element for temperature measurements. The characteristics are specified in JIS and other foreign standards; thus, it permits a highly accurate temperature measurement. Features Sensor: Pt100 or Pt1000 or Cu50 etcTemp.: -200℃ to +850℃Output: 4-20mA / RTDSupply:DC12-40V
-
MIK-603S Temperature signal isolator
MIK-603S Intelligent Temperature Transmitter utilized in automated control systems is a kind of instrument for transformation & distribution, isolation, transmission, operation of a variety of industrial signal, it can also be used with all kinds of industrial sensor to retrieve parameters of signals, isolation, transformation and transmission for remote monitoring local data collection. Features Input: Thermocouple: K, E, S, B, J, T, R, N and WRe3-WRe25, WRe5-WRe26, etc.；Thermal resistance: Pt100, Cu50, Cu100, BA1, BA2, etc; Output: 0(4)mA～20mA；0mA～10mA;0(1)V～5V; 0V～10V;Response time: ≤0.5s
-
MIK-602S Intelligent signal isolator for voltage/current
MIK-602S Signal isolator utilized in automated control systems is a kind of instrument for transformation & distribution, isolation, transmission, operation of a variety of industrial signal, it can also be used with all kinds of industrial sensor to retrieve parameters of signals, isolation, transformation and transmission for remote monitoring local data collection. Features Input / output: 0(4)mA～20mA；0mA～10mA; 0(1) V～5V；0V～10VAccuracy: ±0.1%F∙S（25℃±2℃）Temperature drift: 40ppm/℃Response time: ≤0.5s
-
MIK-1100 LED Display multi panel meter
MIK-1100 is single-circuit digital panel meter with easy operation; double four-digit LED display, supporting input signals like thermocouple, thermal resistance, voltage, current , and transducer input; applicable to measurement of industrial process quantifiers including temperature, pressure, flow, liquid level, and humidity etc. Features Double four-digit LED display;7 types of dimensions available;Standard snap-in installation;Power supply: 100-240V AC or 20-29V DC;Standard MODBUS protocol;
-
MIK-DP Ultrasonic level transmitter
Ultrasonic level transmitter is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver, by a piezoelectric crystal or a magnetostrictive device into an electrical signal by transmitting and receiving sound waves to calculate the time between the sensor surface to the distance measured liquid. As a result of non-contact measurement, measured media is almost unlimited, can be used to measure the height of a variety of liquid and solid materials. Features Measure range:0 ~ 50mBlind zone:＜0.3-2.5m（different for range）Accuracy:1%F.SPower supply: 24VDC (Optional: 220V AC+15% 50Hz)
-
MIK-DY2900 Optical dissolved oxygen meter
MIK-DY2900 Optical type Dissolved oxygen online analyzer, an intelligent online chemical analyzer. The cap of the sensor is coated with a luminescent material. Blue light from an LED illuminates the luminescent chemical. The luminescent chemical instantly becomes excited and releases red light. The time and intensity of red light are inversely proportional to the concentration of oxygen molecules, So the concentration of oxygen molecules is calculated. Features Range: 0-20mg/L,0-200%,0-400hPaResolution:0.01mg/L,0.1%,1hPaOutput signal: 4~20mA; Relay; RS485Power supply: AC220V±10%; 50Hz/60Hz
-
MIK-LZ Metal tube rotameter
MIK-LZ Metal Tube Rotameter is a device that measures the volumetric flow rate of fluid in a closed tube. It belongs to a class of meters called variable-area flowmeters, which measure flow rate by allowing the cross-sectional area the fluid travels through to vary, causing a measurable effect. Features Inpress protection: IP65
Range ratio: Standard: 10:1
Pressure: Standard: DN15~DN50≤4.0MPa, DN80~DN400≤1.6MPa
Connection: Flange, Clamp, ThreadHotline: +86 15867127446Email : info@Sinomeasure.com -
MIK-2000H Handheld ultrasonic flowmeter
MIK-2000H ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance Features
- Pipe diameter:DN32-DN6000
- Accuracy:1.0%
- Power supply: 3 AAA built-in Ni-H batteries
- Case material: ABS
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-2100 Single-loop digital display controller
Single-loop digital display controller with automatic SMD packaging technology, has a strong anti-jamming capability. Designed with dual-screen LED display, it could display more contents. It can be used in conjunction with various sensors、transmitters to display temperature, pressure, liquid level, speed, force and other physical parameters, and to output alarm control, analog transmission, RS-485/232 communication etc. Features Double four-digit LED display;10 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5W DC 12~36V Power consumption≤3W
-
MIK-130T Economic 3-digit Display Fuzzy PID Temperature Controller
The instrument displays with dual row 3-digit numeric tube, with a variety of RTD/TC input signal types optional with an accuracy of 0.3%; 5 sizes optional, supporting 2-way alarm functions, with analogue control output or switch control output function, under accurate control without overshoot. Features Double four-digit LED display;5 types of dimensions available;Standard snap-in installation;Power supply: AC/DC100~240V (AC/50-60Hz) Power consumption≤5W; DC 12~36V Power consumption≤3W
-
MIK-ZP Ultrasonic level transmitter
MIK-ZP Ultrasonic level transmitter taking the advantages of various many level measuring instruments, is a universal one characterized by total digitalized and humanized design. It has perfect level monitoring, data transmission and man-machine communication. The master chip is imported technical m single chip with relevant application specific ICs such as digital temperature compensation. It is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. Features Measure range:0 ~ 15mBlind zone:＜0.4-0.6m（different for range）Accuracy:0.3%F.SPower supply: 12-24VDC
