MIK-RD901 Radar level meter for corrosive liquid

Short Description:

MIK-RD901 Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications – be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications. Features

  • Range:0~10 m
  • Accuracy: ±5mm
  • Application: Corrosive liquid
  • Frequency Range: 26GHz


Product Detail

Product Tags

  • Specification
 Product Radar level meter
 Model SUP-RD901
 Measure range 0-10 meters
 Application Corrosive liquid
 Process Connection Thread, Flange
 Medium Temperature -40℃~130℃
 Process Pressure -0.1~0.3MPa
 Accuracy ±5mm(Less than 5 m) / ±10mm (5~10 m)
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA
RS485/Modbus
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction
  • Product Size

 

  • Installation guide

Be installed in the diameter of the 1/4 or 1/6.   The minimum distance from the tank  wall should be 200mm.

Note:  ① datum ②The container center or axis of symmetry


The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom


A feed antenna to the vertical alignment surface.  If the surface is rough, stack angle must be used  to adjust the angle of cardan flange of the antenna to the alignment surface.


 


  • Previous:
  • Next:

  • Write your message here and send it to us